Hi All,
Our organisation is planning to implement a new VoIP solution, As a part of it we have been asked to build a suitable QoS configuration to prioritize VoIP traffic.
We have Cisco 4510R+E with SUP8-E for user connectivity and Cisco 6807XL w...
Hi All,
We are planning to build a 5K VPC pair. North bound switches are 6509 in VSS mode ( these are in 2 different room).
5K uplinks will connect to both 6509-VSS switches. one SFP i need is 10g-SR and other one i need is 10g-LR.
Will it be...
Hi Team,
We are observing Giants errors 6807-VSS interfaces which are connecting to OTV vdc.
We have a OTV setup on N-7710 switches. Join interfaces are connecting to Cisco 6807 switches in a L3 port-channel.
We have set MTU of 9216 in both side inte...
HI,
I have no option to enable QoS globally. Is there any other command to enable QoS.
Access_1-SW4510-01(config)#qos ?Global QoS configuration subcommands: account Additional lengths to be accounted by QoS Features control-packets ...
Hi,
Attaching config file.
I am able to apply "auto qos trust" which is generating internal policy-map.
We also have existing policy-map, which we can replace:
policy-map 1P3Q1T class PRIORITY-QUEUE priority police cir percent 30 bc 33 ms con...
Hey,
Thanks for the reply...
However it is not accepting command 'auto qos voip trust' in port which is part of port channel.
physical interface config:
interface TenGigabitEthernet5/1 description Link-Core-VS6807-01##VSS## switchport trunk ...
Hi,
We are using card WS-X6904-40G.
We have recently implemented this , we have not got any chance to change MTU and check.
My query is that does Giants packets get dropped or it is a forwarded. I can see counter increasing in thousands per second....