About shalvi.yadav

shalvi.yadav · 11-14-2011

Hi,Cisco NAC is connected to the core switch. All the access switches are L2 connected to the core switch and to the clients.The user vlan is 101 and the access vlan is 11. The trusted and untrusted interface of Cisco Access server has same IP.NAC is...

shalvi.yadav · 09-13-2011

The Cisco NAC is 3315 and software version is 4.1.2.Below are the error logs.[root@PLHO_CAS_01 ~]# cd /perfigo/common/bin/[root@PLHO_CAS_01 bin]# ./test_fips.sh infoInstalled FIPS card is nCipherInfo-FIPS file existsNFastApp_Connect failed: ServerNo...

shalvi.yadav · 09-09-2011

see it directly asks for :he utility will now ask you a series of configuration questions.Please answer them carefully.Cisco Clean Access Server, (C) 2011 Cisco Systems, Inc.Configuring the network interfaces: Please enter the IP address for the inte...

shalvi.yadav · 09-09-2011

the point is it is not asking for the same..see the attached capture during restart. i even used service perfigo config but it is not prompting for FIPS mode.

shalvi.yadav · 09-09-2011

It is a new install. the device is Cisco NAC 3315 appliance. i havent used any external card reader. the device was working fine and i did the configuration and web console was also coming. then the device got rebooted and when the device got up thi...

Member Since	‎09-09-2011 04:33 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	5

User Statistics

User Activity

Cisco NAC Configuration Issue

nCipher server not in operational mode : Cisco NAC

Re: Cisco NAC Server

Re: Cisco NAC Server

Re: Cisco NAC Server