Hello
We are looking to replace a legacy 3750G pair with a pair of Nexus 3Ks. We're specifically looking at the N3K-C3172PQ-10GE. Our ToR switches are Dell N2048s and 5548s, which are currently connected to the 3750Gs using 1G copper. Since the 317...
Hello
We are hooking up a Dell storage server to our Nexus 3k pair and would like a sanity check on the config. We propose using a VPC on the Nexus side and standard NIC bonding on the Dell side. Here is the draft Nexus config:
interface port-cha...
Hello
We have a Cisco Nexus 9396PX with a 10GB Telus internet connection but get charged for any traffic above 6GB. What's the best way to rate-limit the amount of incoming traffic allowed on the link without dropping packets?
Thanks
LB
Hello
We're going to be upgrading a 1G fiber link to 10G. Currently the SFP type in both ends is 1000base-LH. What would be the equivalent 10G SFP required to upgrade and will the cabling itself be compatible?
Thanks
LB
Hello
We are thinking of purchasing Catalyst 9300 switches to replace our 3750Gs and trying to understand how the new subscription-based licensing works. We were informed that features still work after the license term expires so what are the advan...
Hi cdusio
Thanks for the tips, building the new environment offline sounds good, I'll start planning for that. I don't know if we have additional IPs in the same space but will try to find out so we know whether doing the other option is possible. ...
Would it help if I send the spanning-tree priority info for both sides?
The port-channel and interface are negotiating correctly at 10G-full:
CA1CORE1(config-if)# show int status | i 32Eth1/32 VPC to Dell Storag connected trunk full 10G SFP-H10GB...
