Hi All,
Can you share articles or you can explain so, what a difference about Webex Calling Multi Platform and Webex Calling Dedicated Instance . I need table comparison (pros and cons)
Respectfully,
SH
Hi All,
I have bought a webex calling professional license. and manage some users with ext (but I haven't integrated it with PSTN yet)
I tried to call one of the users with the ext but it didn't connect. Is there a configuration that I haven't done ...
Hi Buddy,
I have a case about cisco cube can't connect to CSSM , actually that device already config , below this :
ip name-server x.x.x.x x.x.x.xip http client source-interface GigabitEthernet0/0/0license smart transport smartlicense smart proxy ad...
Hi,
i have a cube which will connect to ITSP with Public IP . Do I have to configure SIP-UA first?because I debug ccsip message when making incoming call but debug doesn't enter CUBE (Term Monitor already)Topology :
CUCM-> SIPTrunk -> CUBE -> ITSP ...
Hi Guys, I have case about CUBE incoming call plar to Auto Attendant (Cisco Unity) , call busy if I do plar to AA but call connected if I do plar incoming to Ext Phone Maybe I will explain my case : SIP Trunk PSTN Number -> Translate to 5030 (AA/CTI...
Hi ,
Please share error log , or write that log in forum Potensial Upgrade Fail :
Network unstable Firmware version difference too Long , i mean you need intermediate upgrade , example you want do an upgrade to version 11 from version 8 . You must u...
Hi Roger,
Many thanks for respond , but before i am apply your suggest config , in and outgoing with my VG running properlly , dan sound hear from both (calling and called) then i just receieved information now , suddenly Sip-Ua not register again , ...
Ok , now sip-ua registered . Thanks But when i test incoming the result no match outgoing dial peer +6221303022xx I do debug ccsip message , error appear 404 not found (no macthing outgoing dial peer)
let say , i do call from my mobile phone dialed ...
Hi , This is result from debug CCSIP Message Incoming Call
id-tangg-vrtr-01#*Sep 6 06:37:51.873: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Received:OPTIONS sip:IP ADD VG:5060 SIP/2.0Via: SIP/2.0/TCP IP ADD CUCM:5060;branch=z9hG4bK3e5bc2171d9d54Fro...
Hi Roger,
Thanks for reply, i hope you can help me
This my config VG
Version IOS -> 17.06.02
voice service voipip address trusted listipv4 IP Add CUCMipv4 IP Add VGipv4 IP Add ITSPmode border-elementallow-connections h323 to h323allow-connections...
