Hi,
Im trying to do some autoconfiguration with my Cisco 1841, using a dhcp/tftp server and EEM applet + tcl script.
DHCP/tftp server part is working but when the router downloads the configuration with EEM configuration, it fails on "cli command" li...
Hello,I just installed c800-universalk9_iox-mz.SPA.156-2.T.bin to support iox on my 819 4G router. Everything seems fine but I find some strange information in iox show commands, see under "Network Information" -> default gateway and mask:show iox de...
Hi,
What i mean by it hangs is that only the first syslog message is generated (first line in EEM applet). Then nothing happens and "show event manager policy active" says its running.
How can I start a debug during autoinstall? I tried to enable asa...
Found out that if I use a countdown instead of syslog trigger everything works fine.
Maybe the router is not "ready" for EEM-CLI when it firsts see the autoinstall log message and bugs out.
Do you have any other tips? Doesn't feel very safe to use a ...
Unfortunetly I don't have support contract for this device, I can only download images from the "restricted" section here on devnet. .../docs/DOC-68539. And there you only have the "c800-universalk9_iox-mz.SPA.156-2.T.bin." version.Could you add 15.6...
Hi,Where can I find 156-1.T1?I only have access to the file area here on devnet community and the only image available here is the 156-2.T for 819 platform.ThanksOscar
