Has there been a firmware update release since we first started the beta testing? I just looked at the system I have and it shows that I'm currently running firmware version 1.00.02.Thank you,
I'm in the process of creating a plan to bond a T1 line to our current T1 line (moving from 1.5 to 3.0 Mbps). Are there any special configuration issues on a Point to Point T1 circuit when used for both Voice and Data if no current QoS policy is in ...
I spent hours reviewing and researching options, fixed by rebooting switch. Now I need to see if the issue is going to return and then schedule an update if needed (currently running the Fuji release 16.9 I believe).
I did a workaround, for visual purposes only, using the C9300-48P switch and added the C9300-NM-4G as the fiber module (which matched my configuration - visually).
I have noticed a few areas lately when working with the Cisco ASA firewalls that a reboot or "clear conn" has fixed the odd issue(s). In the latest case I was running 9.9(2). Glad it worked out for you.
Thank you for this posting - the contents were very helpful! Following this video seem to answer all the questions I had regarding this upgrade - I'm new to the application.
I was able to get the SPA525G phone to connect remotely to our network using SSL VPN, the primary document I used to get it to work was found at https://supportforums.cisco.com/docs/DOC-9124. Because networks are not all created out of the same mold...
