Hi Everyone,I hope you are having a great day. I would like to seek your help with regards to the steps on how to add newly installed network elements on our CiscoWorksLMS 3.2.Thanks You very much!Best Regards,asakurahao
Hi EveryoneWe are running OSPF with 4 point to point parallel links between two routers to carrying MPLS traffic.The said 4 parallel links have equal cost to load balance traffic, however the actual traffic between the 4 links are unequal.The first l...
Hi!I would like to ask about OSPF.We are using 4 links running OSPF point to point with equal cost to load balance MPLS L2 traffic between our two routers.And from what we are experiencing right now is that it didnt balance the load the way it should...
Hi sirs,I would like to ask about HSRP.Is it possible to have a log that indicates an IP address conflict even with HSRP configured?Kindly see sample logs:003180: Aug 1 12:42:02.952 PH: %TAGCON-3-DUP_ADDR_RCVD: Duplicate Address 10.66.1.241 advertis...
Hi All,I would like to ask about the meaning of a certain command which i believe part of Flexi Link.interface GigabitEthernet 0/1 switchport backup interface Gi0/2 prefer vlan switchport backup interface Gi0/2 prefer vlan 255Can anyone...
Hi my apologies for using this discussion but can i ask a favor from you guys? I would like to ask how to do configuration backup for our cisco devices using the ciscoworks lms? We just want the back up to run perioadically.Thank you very much!Best R...
Hi Giuseppe,Good day to you!Im aware of the commands showing the status of ecah vc, but unfortunately i am not that aware on how I can do load balancing the packets using ospf.i have read some documents regarding parallel links running ospf for load ...
Hi Giuseppe Larosa,I am currently using 7606-S with ES plus linecard running IOS SRE5.My apologies but the topic seems a liitle vague to me.We are using pseudowire switching with different virtual circuit IDs for each vlan, the same set off vlans and...
Hi Sir Peter,Sorry for the confusion, allow me to send a copy of a sample topology depicting our scenario later (ill just need to finish the diagram).The 4 links I mentioned are 4 point to point ospf links with equal cost to load balance but unfortun...
Hi j.blakely,Thanks for the input and im very sorry for the late acknowledgement, we are experiencing heavy rains and high flood here in the philippines.Since the command is for load balancing does that mean that by default the vlans declared as pref...