About n.elliott

n.elliott · 10-14-2011

I have just set up a home lab with 4 2600 routers and 2 2950 switches. All the routers have 1dsu wic cards in at least one slot with most having both slots with them.My problem is now that I made a T1 crossover cable to practice the WAN routing for ...

n.elliott · 10-14-2011

Thanks that got it. I also needed to rebuild my cable because I had a pin not quite mated up with the wire. Plugged in the new cable with the config you gave and saw the carrier detection light come on for the first time. Thanks!

n.elliott · 10-14-2011

I don't see it in there either :-(. Here is the output from both routers of that command. I have truncated it to just the serial interface. Apparently this is becoming quite the t/s problem.From RouterA:Interface Serial0/0 Hardware is PowerQUICC ...

n.elliott · 10-14-2011

every time I try to set the clock rate on one of the routers it doesn't take. I checked the running-config after i put it in and notice it is not present. Also being this has rj-45 ends I don't have a DCE side hardware wise. Is there a command to ...

Member Since	‎10-14-2011 02:10 PM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	4

User Statistics

User Activity

Basic WIC 1DSU T1 problem

Basic WIC 1DSU T1 problem

Basic WIC 1DSU T1 problem

Basic WIC 1DSU T1 problem