About mgessner

mgessner · 02-21-2019

Hello everyone! Here a short description of the setup: 2x CAT6509, sup 2t, vss config two internet Uplinks- one 34mbit and a 2 mbit as backup (probably doing HSRP - we don't have access to the config) Access switches are connected redundant to both...

mgessner · 12-12-2003

Hello everyone! I'm trying to set up an 1721 with 1ENET and 1-BS/T. The 1ENET is used to set up a PPPoE connection to your ISP. I need to configure the BRI/Dialer Interface to Backup the PPPoE-Connection. The complete sceanrio looks like this: PIX501...

mgessner · 12-12-2003

Hello everyone!I'm trying to set up an 1721 with 1ENET and 1-BS/T.The 1ENET is used to set up a PPPoE connection to your ISP. I need to configure the BRI/Dialer Interface to Backup the PPPoE-Connection.The complete sceanrio looks like this:PIX501 con...

mgessner · 03-21-2019

Sorry for the delay! problem solved: someone activated ip redirects! just in case someone is running into it too! thanks & Cheers Mike

mgessner · 02-21-2019

Hello Georg, we change the default gateway on the client. With only a few clients using the core switch as default gateway we are fine. This morning we changed the gateway via DHCP for "most" clients - and about 45 - 60 min. later no one was able t...

mgessner · 02-21-2019

Hello Georg, the internet-routers are connected to single ports. The 34MBit ist connected to 1/7/48 The Backup to 2/7/48 switchport speed 100 duplex full spanning-tree portfast edge Changing the client default gateway from .254 (Internet) to .2...

mgessner · 10-23-2008

Hi there!I'm just trying to make my first steps with the wlc526. Which radius-server did you use?Thank you!

mgessner · 12-10-2003

I found something that might be interesting to you.Check "Reliable Static Routing Backup Using Object Tracking". This feature was introduced in 12.3.2XEhttp://www.cisco.com/en/US/partner/products/sw/iosswrel/ps5413/products_feature_guide09186a00801d8...

Member Since	‎12-05-2003 05:38 AM
Date Last Visited	‎05-03-2019 01:42 AM
Posts	8

User Statistics

User Activity

System overload at 3% cpu usage / packet loss

PPPoE with Dialer und Backup

PPPoE with Dialer Backup

Re: System overload at 3% cpu usage / packet loss

Re: System overload at 3% cpu usage / packet loss

Re: System overload at 3% cpu usage / packet loss

Re: WLC 526 Guest Access DHCP Problem

Re: Redundant gateway..