Hi all, is there a way to allow publicly available services to have keep public Ip addresses without nat?  Our service will work better if there is no nat, static or dynamic.  I have  seen some things like NAT 0 but im not sure if that is what im lo...

Hi All, A question on design.  I'm looking for a best practice/design on the subject.  I've worked on an NDS that specified 10% of port density be reserved for spare use.  By that math, for a 24 port switch that would leave me with 2 or 3 spare port...

Hello All, I upgraded ASA version from 9.1(2) to 9.3(2).  My AnyConnect was set up according to http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/70847-local-lan-pix-asa.html for Local Lan Access.  Prior ...

Good evening all,I'm having an issue setting up my ASA to authenticate to an LDAP server.  The ASA is at a remote site and my LDAP server is here at HQ.  I have the tunnels built out and am able to pass traffic, (10.48.1.2 --> HQ Private subnets 192....

All, Are there any considerations to make for connecting newer IOS devices to older CatOS?Summary:6509 switch with CatOS 8.7, policer values shaping 20M cos 5. Router connected is 891 with IOS 12.x. Traffic is untagged and being sent at a rate of 20M...