About darwinsanchez6774

darwinsanchez6774 · 08-25-2017

Good day, I have 2 routers R1 and R2. They are both configured with HSRP under standby group 1. -R1 and R2 has the same priority of 100 -R1 is the active router since it has z higher IP adddess of 10.1.1.3/24. While R2 is the standby with an IP of 10...

darwinsanchez6774 · 06-27-2017

Good day, Can u help me subnet 172.16.0.0/16 for me to have 256 networks. What subnetworks will I have?

darwinsanchez6774 · 05-24-2017

Good day everyone, I have attached an image as a reference. I have 192.168.1.0/24 network connected to R1's fa0/0. I also have 192.168.2.0/25 connected to R2's fa0/0. R1 and R2 is connected via serial using R1's s2/0 and R2's S2/0 ports and the netwo...

darwinsanchez6774 · 05-17-2017

Hello, I have 2 routers, r2 and r3 which are connected via serial. R2's s3/0 and R3's s2/0 belong to 10.1.1.0/30 network. A switch (S3) is connected to R3 via trunk link on R3's fa0/0 port with an Ip add of 192.168.2.129/25 which belongs to 192.168....

darwinsanchez6774 · 02-28-2017

Hello, it's my first time posting here and I will very much appreciate your kind response guys. I was just wondering how does a switch handle untagged traffic? If an untagged tragfic from a vlan passed through a trunk going to another switch, will th...

darwinsanchez6774 · 06-29-2017

So for this particular scenario....i should make an excemption and always remember that 0 is included in the count....thankyou very much

darwinsanchez6774 · 06-29-2017

Hi...i see your point and thankyou. But i am wondering, Iam actually following a method of subnetting and all of the time I get the right answers through it until i encountered this problem. It goes like this. Given: 172.16.0.0/16 Requirement: split ...

darwinsanchez6774 · 05-25-2017

Thanks Jon but what I want is to put the acl on r1's fa0/0 port so that i can still ping 10.1.1.4/30 network. My goal is for pc1 to be denied to the whole 192.168.1.0/24 network. Is there any other workaround for this? Thanks

darwinsanchez6774 · 05-20-2017

That is so correct Sir, thank you very much

darwinsanchez6774 · 05-20-2017

Thankyou Sir, I tried to put a default gateway and it worked...thanks again

Member Since	‎02-24-2017 02:45 AM
Date Last Visited	‎08-26-2017 12:05 PM
Posts	22
Total Helpful Votes Received	10

User Statistics

User Activity

HSRP preemption behavior

Help: subnetting

Standard ACL, source can still ping node of denied network

Unable to ping vlan ip address on a layer2 switch

Untagged traffic on native vlan

So for this particular

Hi...i see your point and

Thanks Jon but what I want is

That is so correct Sir, thank

Thankyou Sir, I tried to put