I have a scenario where in the Core Switch (6500) is running only as Layer 2. And this switch is connected to a Firewall via trunk links. Behind the core switch is access switches on where the user and server farm is connected. The server's/user's ga...
Hi,
I am new to Wireless networks and a I have some clarifications.
I have a scenario wherein my client needs to upgrade to a new WLC 5520. They have a two sets of 5508 WLC. One pair is configured for HQ office and another pair is for Remote Site...
Hi Guys, I have a few questions below. 1. The url https://www.cisco.com/web/secure/spa/posture-offline.html also applicable for ISE 2.7?2. how would I know that this is the latest file?3. Is this available in cisco downloads? because I can't find the...
Hi Christian,
I have a similar setup as yours. Just curious, have you enabled "ISE NAC" on the SSID? because I cannot enable this feature If Vlan-Based-Central-Switching is enabled. Is this even necessary?
Thanks,
John
Hi Richard,
I cannot enable the ISE NAC when vlan-based-central switching is enabled and vise-versa. If I enable vlan-based-central switching I am getting an error below.
"The following errors occurred while updating the WLAN: VLAN Based Central...
Hi Richard,
First, we are using Aruba Clearpass Policy Manager as Radius/Remediation.
does the WLC say it is mapping the Client to the expected Interface? - Yes we are seeing the user is on quarantine vlan (vlan 103). And its stuck there. From th...
Hi Richard,
Thank you for your prompt response. I have another inquiry about your statement below.
If the VLAN does not exist at the AP but it does exist in the WLC, the Client gets switched via that VLAN through the WLC.
My setup is as follows...
