About igo.gunawan

igo.gunawan · 03-03-2017

Hi, I have CME version 10.5, and combination of SIP & SCCP phones. This is about remote presence using BLF speed dial. - SIP phone (8851) on site A can view SCCP ephone dn on the same site -> OK - The same SIP phone on site A can't view SCCP ephone ...

igo.gunawan · 03-02-2017

Hallo, I have CME 10.5 with 2 PSTN lines. There is combination of SIP & SCCP phones here. How if I want to route an outgoing call from a SIP phone to a voice port? Thanks.

igo.gunawan · 04-06-2017

Hi dawsonpettifer1 & all, I have the same issue. This is the config I added, by tagging digits in the front of dialled number, but still doesn't work. Do you know what's wrong? Thanks. dial−peer voice 1 voip translation−profile incoming Phone3 answ...

igo.gunawan · 03-30-2017

I registered phone 8851 in CME 10.5 using fast track. Example: voice register pool-type 8851 xml-config maxNumCalls 6 xml-config busyTrigger 6 num-lines 77 description Cisco IP Phone 8851 reference-pooltype 9951!voice register global mode cme source-...

igo.gunawan · 03-06-2017

Please see below the related config on CME site A. voice service voip ip address trusted list ipv4 118.82.32.132 ipv4 10.1.100.250 ipv4 10.2.2.253 ipv4 10.2.100.253 ---------------------------------------------> (CME on site B) allow-connections h323...

igo.gunawan · 03-06-2017

Hi Dennis, Thanks for the information. The 2 locations are connected using VPN (SIP trunk). Given the fact that using BLF speed dial, SCCP phone (8945) on site A can view SCCP phone (8945) on site B, I think the SIP trunk has been configured correctl...

igo.gunawan · 03-03-2017

Hi Ellen, I have similar issue, but for remote presence. What did you finally do to solve this issue? Thanks.

Member Since	‎03-01-2017 05:14 AM
Date Last Visited	‎09-22-2021 12:21 AM
Posts	9

User Statistics

User Activity

Remote Presence

Route Outgoing Call to Specific Voice Port

Hi dawsonpettifer1 & all,

I registered phone 8851 in

Please see below the related

Hi Dennis,

Hi Ellen,