About ctabeling

ctabeling · 12-03-2003

I wonder how to config EzVPN for router to support IPSEC over TCP (10000) or any other config to support PAT.I've configured the router like in the sample configs and a VPN client 3.x cann connect (without NAT/PAT).From the concentrator I know that t...

ctabeling · 11-11-2002

I like to configure a E1 PRI between 2 routers so that the B-channels are only dialed when needed. So start with the B channel 1, when die Bandwith goes over 64K dial the second one and so on (like ppp multilink with dialer-load-threshold for BRI). I...

ctabeling · 01-22-2002

IOS 11.2 on Cisco 7206. When I copy e.g. IOS of 4 MB only one packet of the flow is reported to the NFC. Is there anything to configuere to get the full flow?Thanks, Christof

ctabeling · 12-11-2003

Hi Brian, thanks for the document! It's similar like I have configured it, but it doesn't state anything how to config IPSec over TCP Port 1000 or any other way how to support 3rd party PAT devices :-( - any idea?

ctabeling · 01-21-2002

Hello Mark, interesting, we had the same problem on a cat6509 sup1 msfc1. Only reboot helped.Unfortunately I do not have a solution, but a workaround: we had to migrate to integrated IOS anyway and the problem is fixed...but we still wonder what this...

Member Since	‎01-21-2002 11:17 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	5

User Statistics

User Activity

config EzVPN to support IPSEC over TCP/through PAT

configure E1 PRI DDR for bandwidth on demand

Netflow reports only first packet of flow

Re: config EzVPN to support IPSEC over TCP/through PAT

Re: Anyone know what L3Aging is on 6509?