Hello everyone,
The sysadmin at work requested my help to revamp the company's network. However, I do not have an IT role in the company but I'm currently attending a networking course at university and will be having my CCENT exam in a few weeks. ...
Hello,
I have a home lab that consists of 2 3550's and 1 1841 router. I'm learning about VLANs and trunking, and how to configure them. I've included a topology of the exact network that I've build to give you a better understanding of what i'm tryin...
Hopefully the reboot caused the pings to work. I can ping from both PC's to all default gateways, 192.168.10.1, 192.168.20.1 and 192.168.99.1 and both switch SVI's, 192.168.99.2 & 192.168.99.3. But I'm still unable to ping between hosts.
I pinged from 192.168.10.10 to 192.168.20.1, and from 192.168.20.10 to 192.168.10.1. Both pings were successful, but I remember on earlier tests a few days ago that those pings were unsuccessful, I'm not sure what changed to make them work.
source 1...
Thank you very much for your help Rick, I'm really interested to see what the problem is. I'm using a console cable to configure the devices and believe i've done everything correctly. Here's the debug output.
R1#*Mar 10 10:01:14.487: IP: tableid=0,...
The pings did not work even with the wireless capabilities turned off, I've included screenshots of ping and tracert commands. The problem is very puzzling at the moment, but I think it's at the hosts.
from VLAN10PC .10.10
from VLAN20/PC - .20.10...
When i issue the show ip protocols summary command, the following is displayed. but when i issue the show ip protocol command, there is no output.
R1#show ip protocols summaryIndex Process Name0 connected1 static
The laptop only has one Ethernet in...
