Hi guys,Facing this issue too.I issued below command only and it cleared the error. You have to first determine the minimum power required by the third party device drawing power from the switch. In my case it was hikvision cameras.power inline consu...
Hi Peterson, You can boot from tftp. Set up tftp on you pc and have a different image ready(use correct image file name on the TFTP_FILE section), assign yourself sample IP 192.168.138.10 mask 255.255.255.0 no need of GW, patch yourself on the manage...
Hi Ateyi You are encountering the error due to a bug belowhttps://bst.cloudapps.cisco.com/bugsearch/bug/CSCvg37458/?rfs=iqvred Issue boot command on rommon mode - It will boot with the available ios on the flash.Once it boots, you need to upgrade the...
