About braininvest

braininvest · 01-03-2013

Hi all,I have a Cisco RV220W router (firmware version 1.0.4.17).I would like to have two separate networks with the following specifications:Netwrork1: address range for the network is 192.168.0.1-254. All devices should be able to reach eachother wi...

braininvest · 01-03-2013

Hi Tom,Thanks for pointing out that it should have worked with those settings. I have changed the firmware to 1.0.3.5 and it works ok. I believe there is something wrong with the newest firmware.Thanks again,Mate

braininvest · 01-03-2013

Hi Jonathan,I think you might have misunderstood my problem. SSID broadcast is needed on both networks, because I want to be able to connect to both wireless networks (without necessarily having to know the SSID).My problem is that within network2 (E...

braininvest · 01-03-2013

Hi Tom,I have tried two different versions but none of them worked- vlan id 1000, port 4, set to tagged (everything else stayed the same) - same result as before- vlan id 1, port 4, set to excluded and vlan id 1000, port 4, set to untagged - still ca...

Member Since	‎01-03-2013 05:45 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	4

User Statistics

User Activity

RV220W second vlan DHCP issue

Re: RV220W second vlan DHCP issue

Re: RV220W second vlan DHCP issue

RV220W second vlan DHCP issue