Hi Edson,Can you try this hidden command on the appropriate interface and see if this helps? (config)#controller e1 0/0/0
(config-controller)#cas-custom 0
(config-ctrl-cas)#collect-call-enableThanks,K
Hi Anil, Configs look ok, the telco should be able to confirm what switch type you need. Also, if it was a wrong switch type, I would still expect to see something come back in response. I would just call up the telco and have them check out the ci...
Hi Paul, What is the exact call flow from the CME to the PSTN? Is the PSTN link off of the Nortel?Can you post debugs of a failed call using the following?!debug ccsip messdebug voip ccapi inout!Thanks,K
Hi Sechaba,The cause code from the PRI ,Cause i = 0x8283 - No route to destination, indicates a issue on the telco side. You should engage the telco and have them check how these calls are being processed and if they see a issue from their side.Are ...
