Hello:The datasheet indicates that PTP is supported on the Cat9300Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy making it suitable for distribution and synchronization of time and fr...
I am not able to run the Firepower MIgration tool 2.1.X on my windows 10 machine, I get the following error and the tool just exits.1.3 seems to work fine on the same platformAny help much appreciated.Thnx File "C:\Jenkins\Build_virtualenv\penv\lib\...
Hello:
I have installed a new DCNM OVA 10.4 version with a single Nexus 9236
I added the switch in the inventory and when I try to do a discovery, it get stuck in discovering..
Ping works fine bidirectionally
snmp-server user DCNM-XXXX networ...
Hello
DC to DC VXLAN/VTEP over L3
My understanding is that XCAST RP is not required if we use MP-BGP EVPN for the DCI over L3.(VXLAN environment)
Yet, I am reading a whitepaper and I see both being configured.
Please shed some light.
Thanks
Hello:
appreciate any help on the error below
Thanks
IR809-LAB#bundle install flash:ir800-universalk9-bundle.SPA.156-3.M.bin
Installing bundle image: /ir800-universalk9-bundle.SPA.156-3.M.bin..........................................................
Basically, I used the same DCNM to discover a N7K and it worked first shot.
So I compared the config between the N7K and the N9K and I saw the differences in the logging level and the role VDC-ADMIN.
I changed those two parameters and voila.
Than...
Hello:
Both seed and switch mode.
I got it working finally.
I changed the role from Network-admin to vdc admin.
I also configure "no logging level all"
Thanks
