There was some missing configuration on the watchguard and the bovpn has a gateway in the 9.x subnet...

Thanks Liam. Its working now. Thank you for all your help.

Liam, I cant ping any host on either subnet. The only thing I can ping is both 1.1.1.1 and 1.1.1.2 o...

Im currenlty setting up the watchguard for RIP. I am able to ping 1.1.1.2 from the 192.168.9.x subne...

Liam, Do I have to do anything as far as ACL is concern? I would think no.

Appeciate it. Yes, Thats how I am testing the connection by bringing down the WAN interface on the c...

Thanks Liam! It shouldnt cause any issue but of course it will be tested. Ill let you know.

Liam Yes your diagram was spot on. Thanks for putting that together. The Watchguard is able to use D...

Liam, Thanks for the response. The Watchguard has a WAN connection via tw telecome on port 0, port 1...

I appreciate any Help or input!

Liam, Right now the two networks has a tunnel setup and they have communications between the two via...

I have a cisco 2921. I have 2 networks that has its own router192.168.1.0 network is connected to wa...

Thanks for the reply Karten and John. This is a brand new router and will be securing it soon.The ci...

I am configuring a vpn ipsec tunnel with cisco isr 2921 router and Watchguard edge 1250e. I have the...

I am getting the following. Ill appreciate any help.ug 13 21:41:45.451: % Multiple self signed certi...