About Jrisunza82

Jrisunza82 · 02-20-2013

I am testing a fiber connection over media converter.The cenario is as follows.Setup sfp interface IP on cisco router. Connect Fiber to Media Converter fiber interface and connect Ethernet interface to Firewall Ethernet Int and setup ip.Cisco router ...

Jrisunza82 · 06-06-2012

Router: 3600 SeriesFlash: c3640-i-mz.122-29b.bin6 Channelized T1/PRI portsOne of our T1 crashed do to rain storms. It's a wet pair that causes the drop. Which is not my concern at the moment.What i am facing with is that the Router has to be rebooted...

Jrisunza82 · 02-21-2013

This is test environment where in the future we would like to support this kind of setup.

Jrisunza82 · 02-21-2013

Thanks for the reply.I think that you might be right. I guess i need a converter as a stand-alone application.All a really want to do is configure Cisco Router with an GLC-T SFP and connected over fiber to a location and from that location use a con...

Jrisunza82 · 02-21-2013

Thanks for your reply.To asnwer your question. I do have a GLC-T SFP module on the Cisco router.From that i want to hook the cisco fiber port side to the fiber port side of the converter and from the Ethernet port side of the converter to the firewal...

Jrisunza82 · 09-25-2012

You guys are welcome. Hope it helps you out. Sent from Cisco Technical Support iPhone App

Jrisunza82 · 09-21-2012

Fa Khan, to find the wet pair I did the following. 1) The interface only goes down during a storm.2) Checked for errors on the line on each location. a. From ISP to Location1 b. From ISP to Location2 By doing this we determined that the issue wa...

Member Since	‎06-06-2012 09:13 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	9

User Statistics

User Activity

Fiber to Ethernet converter setup.

Serial1/0:0 Protocol Down.

Re: Fiber to Ethernet converter setup.

Fiber to Ethernet converter setup.

Fiber to Ethernet converter setup.

Re: Serial1/0:0 Protocol Down.

Re: Serial1/0:0 Protocol Down.