Hi,
At the moment we have a chassis with 2xA9K-2KW-DC version 1 PS modules in two power enclosures. Due to some expansion of the inserted modules in the chassis, we need more than 2kW power. We have spare 2 spare PWR-4.4KW-DC-V3 with the corespon...
Hi,I am struggling with a strange problem. I have noticed that in our CUCM some of our ATA devices started to have connectivity issues. If you ping it 5 requests are ok and 2,3 time out. All basic network troubleshooting is done an...
Hi, I am in the middle of creating a new QoS design strategy for a MPLS network with ASR9k Core and 76k and Juniper PE routers. I have some doubts and I face some problems finding enough information about the integration of the new ASR9k an...
Hi,I have been trying to addACE20-MOD-K9 in ANM 4.2 (0) but when I try to import it times out and I get""Failed to import ACE configuration: Device discovery failed: Connection timed out.""I have double-checked credentialn and access rules on the mod...
Hello, I am in the middle of implementing a Singlewire PushToTalk system in a wireless network with Cisco 5508 WLCs and Cisco 7925 phones. I managed to configure everything and PTT works with the exception that from time to time there is a i...
Can you please verify the links or the attachments because I cannot download or extract the .rp files.I struggle with the same issue - regional pack for Bulgaria.
No, I still have the same error. I am not familiar with the way the ANM adds the ACE module. Does it try to ping the module and then log on via ssh or?Georgi.
Hi Alessandro,thank you for your reply.I have the host chassis device (Catalyst 6500 series chassis) already imported in ANM and the server recognizes the ACE module correctly.Also the ANM server can ping the ACE module and there is no firewall betwe...
