Hi All,
I'm currently stuck on wondering why l2tpv3 is up but traffic don't forward and my target to extend Vlan from 1 router to another doesn't work
In attaching the configuration but basically, I have two industrial IR1101 with LTE module.
Throug...
Hi everybody,
I'm completely stuck on found a solution for this problem.
I need to extend a VLAN over a connection between 2 IR1101 through cellular interface.
The problem is that any kind of tunnel or feature as Xconnect pseudo wire need to specify...
Hi MHM,
I just found the tricks.
no compatibility between the SVI Interface with sub interface on the same router. I just use the physical port, and put in access the port of the SVI interface, and everything is working correctly.
Thanks for your in...
routbuisson#sh int gigabitEthernet 0/0/0GigabitEthernet0/0/0 is up, line protocol is up Hardware is ISR4321-2x1GE, address is b4a8.b901.59f0 (bia b4a8.b901.59f0)MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, reliability 255/255, txload 1/255, rxlo...
increase! according with how many ping try from both side. If I stop ping, stop also the counter.
That's why, It looks so strange... and just because I don't have enough and I want to solve this feature that actually should be a commodity, I create a...
of course, is static, of course pc can pc vlan switch interface, of course if I directly connect the 2 pc with a direct ethernet cable can ping each other, and no of course with xconnect I can't ping between pc as well as between SVI Vlan ip interfac...
