As Rick mentioned, the client sends the request as broadcast, not unicast to the DHCP server.You can use one of below access-list entry to make it work:access-list 101 permit tcp any eq 68 any eq 67access-list 101 permit ip host 0.0.0.0 host 255.255....
Yes, the difference is with features supported at the image level. Refer to below document to know additional features supported by enterprise image:http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35sa6/eescg/mascovr.htm
Yes, MST can interact with other STP standards. MST is a IEEE standard, so it has to interact with other STPs.MST interacts with other STPs through IST instance. At the MST region boundary, other STPs doesn't know that their neighbor is running MST.R...
Do you mean only this image is not booting or the switch is not booting up with any image?If none of the image is booting, get the switch in rommon and get below command outputs. Let's verify if the boot variables are set correctly and if the switch ...