About donkawahigashi

donkawahigashi · 11-16-2010

I am having numerous problems with my SPA-8800. I am using the SPA-8800 as an FXO gateway for 4 verizon fios analog trunks into a PBX In A Flash (Asterisk 1.4) system. I am not using any of the FXS ports. The FXO ports are used for all inbound and ...

donkawahigashi · 08-11-2011

Unfortunately, I was never able to get this to work right - always had too much echo on the lines. I ended up buying a digium TDM410 clone off of ebay for 84.95 (including shipping). It works much much better than the spa-8800 - no echo problems.Do...

donkawahigashi · 11-22-2010

Thanks for the reply. I think I solved problem 1 (or at least minimized it). Just before sending out the HTM file last week, I changed the DTMF level from -16 to -10 - that seems to have solved the intermittent second dial tone. This morning I cha...

donkawahigashi · 11-18-2010

Andrey,I have attached an HTM from the SPA-8800. Here is the asterisk config on one of the trunks (they are all identical with the exception of the port, username and secret:This trunk's name is pstn2, the PEER info is as follows (with some comments...

Member Since	‎11-16-2010 03:23 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	4

User Statistics

User Activity

SPA-8800 Woes

SPA-8800 Woes

Re: SPA-8800 Woes

Re: SPA-8800 Woes