Has anyone used the Cyberdata Door Intercom http://www.cyberdata.net/products/voip/digitalanalog/intercom/index.htmlwith a UC540 System? Also looking to use this to operate the door strike, does anyone have anything to offer on this?Thanks
I am trying to get the multi-level AA working on my UC 500I have a base AA at ext 298I configure option 3 to send to submenu1This submenu appears to be created as 2981But when you call 298 opt 3 you get dead air for about 10 seconds then disconnec...
I cannot get the PA-MC-8T1 to work on our 6509-NEB. See the flexwan module ok but not the PA, IOS is 12.1(27b) so I am ok there. I am wondering if it is an issue with not being supported by the SUP1A-2GE. Any help would be appreciated.
I have a C6509NEB Sup1/MSFC1 that we just switched from hybrid to native mode. Loaded c6sup11-pk2s-mz.121-27b.E.binFrom best I can tell this should be supported. Error - Card in slot 7 is unsupported. The image for the card is not bundled in image....
Well I think this is a major shortcoming, most service business and manufacturing businesses (the ones that really care about time clocks and hourly employees) will have more people than phones or VM's. I assume that additional cost is also incurred...
So, each user you are using to track time on has to have a TCV license and a voicemail seat? I see many businesses having more employees than they may have seats on the UC.
Thanks for the response Alberto. I know the VPN needs to terminate at the UC, but I have to pass it through the SA. But the UC would seem to require a public IP address on the WAN in order for the wizard to configure the phone. As you run the wiza...
We are having a similar issue in that we cannot get Voicemail to email via SMTP. We have also configured Fax to Email and it works fine, so we know the UC can talk to the SMTP server. As for your fix, it would seem that our DG points to the ISM so ...
I ran a case through TAC, they were able to reproduce the issue and have deemed it an issue with CCA. Issue is with both 2.0.1 and 2.1We have worked out a work-around but it is outside of CCA.
