Hi -x- if you deploy N1Kv on UCS Blade hardware, the port-channel option has to be "mac-pinning" only due to internal Fabric Interconnect architecture.http://www.cisco.com/c/en/us/products/collateral/switches/nexus-1000v-switch-vmware-vsphere/white_p...
Hi Daniel -Thanks for the updates.For port-channel, all the ports should have same NIC speed, just like regular physical switch port-channel config. requirement.http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_1_4/inter...
hi -A few more questions -x- what version of N1Kv? -> [show ver ]x- status of the interface e4/3 -> [show interface e4/3 ] and [show run int e4/3 expand ]x- [show logg log | in suspend ] You can try the following to see if it could fix the issue:x- ...
Hi -not quite understand the question....From the UCSM, you only create the hardware components for the blades such as vNIC/vHBA, which is presented as physical links for the esxi hosts.When configuring the N1Kv or VMWare standard switch, you will ne...
