About Nitin Agarwal

Nitin Agarwal · 05-17-2012

In one of our projects, we are running CSM 3.2 on VMWare ESX 3.5.There is a project in place to have the ESX upgraded to 4.1This looks like a challenge as CSM 3.2 is not supported on ESX 4.1. Cisco TAC has suggested to upgrade CSM to 4.2 Queries:1. ...

Nitin Agarwal · 08-10-2010

Hi,You will not be able to use DDNS in a Lan to Lan setup. That will work in the remote vpn setup.Regards,Nitin Agarwal.

Nitin Agarwal · 08-10-2010

Hi,As per my reserch it is not possible to have two syslog server configured and working at same time.They can be configured as primary and secondary.Regards,Nitin agarwal.

Nitin Agarwal · 08-10-2010

Hi,Well these are two different scenerios. Interface redundancy is at a single ASA level. If the unit fails then there is no point in keeping a redundant link.On the other hand if you consider failover between two ASAs then yes you make sure that if ...

Nitin Agarwal · 08-09-2010

Hi,Please post the output of show crypto ca certificate and also the show crypto ca trustpoint. Let me know from which trustpoint you created the CSR initially while sending the first request.Regards,Nitin Agarwal

Nitin Agarwal · 08-09-2010

Hi,Yes ASA is much stable to the problem that you referred. To answere your second question you may pat the tunnel traffic to even a single ip address with policy nat statement, but then this will be a uni-directional tunnnel.Regards,Nitin Agarwal

Member Since	‎08-09-2010 09:54 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	12

User Statistics

User Activity

Cisco Security Manager related queries

Re: IPSEC VPN with dynamic to dynamic IP

Re: ASA 5550 - Two different syslogs servers

Re: ASA Redundancy

Re: Installing a SSL certificate for WebVPN

Re: ASA VPN Config - A question from the past :-)