About k.hariharan1

k.hariharan1 · 08-15-2011

Hi ,I have a doubt on MPLS TE tunnel selection for LSP. I understood that by using the TE tunnels , suppose if have 3 different path to reach the next hop router. we can set a priority by using the command tunnel mpls traffic-eng priority (set prior...

k.hariharan1 · 03-04-2011

Hi,I have the Hierarchical QoS Policy as mentioned below, there are three different types of traffic CBS , WEB , ANTIVIRUS.My requirement is whenever there is no traffic matching the CBS and WEB class antivirus traffic should utilize the full bandwid...

k.hariharan1 · 12-13-2010

Hi experts,i am trying to create three classes as follow but i am getting a errorthis is just for exampleclass-map voicematch protocol rtpclass-map webmatch protocol httpclass-map AVmatch protocol bit-torrentspolicy-map HARIclass voicebandwidth perce...

k.hariharan1 · 12-13-2010

Hi,I want to udersatand exactly what is the use of bandwidth remaining percent command ,1. The bandwidth remaining percent command takes a percentage of the available bandwidth not from the total reservable bandwidth (100% of the interface). But the ...

k.hariharan1 · 12-06-2010

Hi all,I have a cisco router in my central site which is connected to MPLS service provider router and there are 100 remote branches connected to the MPLS cloud, in that 50 sites are having VSAT connectivity hence i have configured GRE tunnels for th...

k.hariharan1 · 08-16-2011

Hi shivlu,Thanks for the reply. So the priority value which we are setting under the tunnel configuration define which is the preffered link for LSP. and as per your configuration both the tunnel priority values are identical so the per destination l...

k.hariharan1 · 03-05-2011

Hi Gustavo,Thanks for your reply, and your understanding is correct.as you mentioned i agree "policing and shaping happens regardless of congestion".I dont want to give LLQ for Antivirus traffic. what else we can do for achieving my requirement.My re...

k.hariharan1 · 12-15-2010

hi all ,i really want to understand why it is not possible , if it is not possible why cisco is giving the folowing examples in thier website........　https://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.7/qos/command/reference/qr37book.pdf　ExamplesIn ...

k.hariharan1 · 12-15-2010

Hi milan,I am unable to configure bandwidth in kbs and bandwidth remaining percent or bandwidth percent in single policy map.Router(config)#policy-map HARIRouter(config-pmap)#classRouter(config-pmap)#class mapRouter(config-pmap)#class voiceRouter(con...

k.hariharan1 · 12-13-2010

Thanks for your reply.Regards,Hariharan k

Member Since	‎03-03-2009 12:38 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	66
Total Helpful Votes Received	5

User Statistics

User Activity

MPLS TE Tunnel priority

Hierarchical QoS Policy

unable to mix bandwidth percent and bandwidth remaining command

Qos Bandwidth remaining percent command

Qos for GRE multipoint tunnels.

MPLS TE Tunnel priority

Re: Hierarchical QoS Policy

Re: unable to mix bandwidth percent and bandwidth remaining comm

Re: unable to mix bandwidth percent and bandwidth remaining comm

Re: Qos Bandwidth remaining percent command