About ChristopherGibson

ChristopherGibson · 08-11-2011

Hi.I was trying to use the uploading of a config.xml file to the modem to configure it (so that I can easily configure a fleet of modems to be the same).This approach has in the past appeared to work OK, but I recently attempted to use the same proc...

ChristopherGibson · 08-10-2011

Hi.I’m rolling out a fleet of SRP 527W modems for communications support of a remote appliance. The modems are mostly operating fine, but we have seen one modem’s data rate degrade over time, and eventually drop off the ADSL connection completely. ...

ChristopherGibson · 06-07-2011

I have a “fleet” of SRP 527w modems, and all but one are running Firmware version 1.01.17. The one black seep is running 1.01.9 Firmware. I had some difficulty configuring the one with 1.01.9, as it was refusing to accept new /admin/config.xml file...

ChristopherGibson · 08-16-2011

Thanks Andrew.Excellent, just what I was looking for.Best regards, Chris Gibson

ChristopherGibson · 08-15-2011

Thanks for the reply Rick and Andrew.Tryed Andrew's responce before I read the [Edit:... ] note.The command looked encouraging from the local interface... Said that it was going to reboot when idle, but nothing happed, as Andrew pointed out this was...

ChristopherGibson · 06-08-2011

Hi Andy. Thanks for the reply.I had already visited the download centre and downloaded version 1.01.19, but 1.01.17 does not seem to be available there.My preference would be to use 1.01.17 to keep the fleet consistent (without needing to reflash...

Member Since	‎06-05-2011 09:49 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	6

User Statistics

User Activity

SRP 527w Port Forward configuration loss.

SRP 527w Automated reset

SRP 527w Firmware version 1.01.17

Re: SRP 527w Automated reset

Re: SRP 527w Automated reset

SRP 527w Firmware version 1.01.17