I'm a TAC Engineer with the Core Architecture and Technology Solutions Team.
I deal with IOS Architecture issues like crashes, memory failures, High CPU Utilization.
I deal with ISRs, UBR10k architectures
Hi Sintu, Can you be a little clear on the exact problem description? You want to take a back up of the running config or the bootloader software? In any case you need to check whether you have a tftp server configured in your network, if not you can download tftpd32 from http://tftpd32.jounin.net/ This will install the tftp server on your PC. Log into the switch from your PC type in the following comands 6509#copy run tftp: Address or name of remote host [10.10.10.2]? 10.10.10.2 // Assuming 10.10.10.2 is your PC (tftp server's) IP
Source filename [running-config]? running-config
Destination filename [running-config]? running-config
You will get a confirmation that the file has been successfully uploaded. The process is similiar if you want to backup the bootloader software to your tftp server. The syntax is 6509#copy tftp: In your case it will be 6509#copy bootflash: tftp: Address or name of remote host [10.10.10.2]? 10.10.10.2 // Assuming 10.10.10.2 is your PC (tftp server's) IP
Source filename [c6msfc2-boot-mz.121-8b.EX5]? c6msfc2-boot-mz.121-8b.EX5 Destination filename [c6msfc2-boot-mz.121-8b.EX5]? c6msfc2-boot-mz.121-8b.EX5 Let me know if this answers your question. Cheers, AB
... View more
Hi Michael, Can u try this? Router#conf t Router(config)#voice service voip Router(conf-voi-serv)#mode border-element After this do a write mem which will save the configs and reload the router. Please let me know if we are able to see the flow options. Regards, Abhi.
... View more