About Siemens_SWP

Siemens_SWP · 08-25-2014

Hi Cisco commuity.I have a configured Nexus 7000 setup with 4 x N7K routers Fabricpath and Anycast HSRP been enabled. I just have one question regards to Anycast HSRP. Is it preferable to have all vlan´s in same anycast hsrp group or should they be ...

Siemens_SWP · 08-14-2013

Hi i hope someone has some good ideas, to what can be wrong here. I got 2 Catalyst 6500 running as collapsed Data center core / distribution. And then i have some different types of access switches down under Nexus 5K and some some 3...

Siemens_SWP · 11-02-2012

Hi I have a DHCP server placed in a server VRF, i also have some clients in another VRF. I want the Dhcp to lease out ips to my clients in the other VRF. All traffic is going through a firewall, both bootps and bootpc has been allowed in the firewall...

Siemens_SWP · 06-22-2012

Hi Cisco Support communityI am trying to make a redirect from http to https. the goal is whenever a user writes in http://10.80.199.71 it should be redirected to https://10.80.199.71I am just haveing some trouble making it work. :SI have attached the...

Siemens_SWP · 02-02-2012

Hi We got clients accessing a page loadbalanced on our Ace 4710. Users access this page https://hostname.domain.net/Reports we want this to be rewritten to https://hostname.domain.net/Reports/Page/Folder.aspx is this possible to do on the ace? confi...

Siemens_SWP · 01-11-2013

Its pretty easy to setup.just followed this guide from cisco http://www.cisco.com/en/US/customer/docs/switches/lan/catalyst4500/15.1.2/XE_340/configuration/guide/vss.html#wp1214257

Siemens_SWP · 11-04-2012

I want to use my windows 2008 r2 as the DHCP server. @ Mohammad Ali - I have allready tried to put in the VRF like this- ip helper-address vrf 600 149.212.47.103 its not possible to just put in the vlan.

Siemens_SWP · 06-27-2012

It works now. Tried the sugggestion from Ajay and it works so thanks alot for the advice to all of you.

Siemens_SWP · 06-22-2012

Sounds like the serverfarm is still being used somewhere. Maybe in a policy map ? try in cli mode on the ace sh run | in Serverfarm oldserverfarm and see if it finds something.

Siemens_SWP · 02-03-2012

Hi Pablo. I have tried to follow your advice, but i still can´t get it to work. I have configured it like this ( this is not the full configuration but just some of it ) see in attachment. rserver redirect Redirect webhost-redirection https://%h/Re...

Member Since	‎01-09-2008 10:56 PM
Date Last Visited	‎06-16-2018 06:50 AM
Posts	29

User Statistics

User Activity

Fabricpath with Anycast HSRP (how many vlans in anycast group)

High cpu - HLFM address lea

Dhcp server in VRF

ACE 4710 - Redirect HTTP to HTTPS

ACE 4710 Url Rewrite.

VSS for 4500 is here!

Dhcp server in VRF

ACE 4710 - Redirect HTTP to HTTPS

ANM 5.1 can't delete a serverfarm

Re: ACE 4710 Url Rewrite.