About ccie16351

ccie16351 · 07-01-2020

Hi,to comply to hospital's rules, we moved Sectra PACS servers behind ASA-5585 Data Center firewall. The issue is, medical staff can't browse the images once PACS servers are behind the firewall. The servers are pingable from workstations at the hosp...

ccie16351 · 10-29-2019

Hi,I have a ISE Use Case Employees uses corporate asset (laptop) to access enterprise network from wired network when they are on their desks and connect using the wireless network when they are in the meeting room. The issue is, AnyConnect Network ...

ccie16351 · 02-27-2019

Hi, My ACS is rel 5.8.1 I am adding (not deleting) 2 additional AD Groups, I got error message says The item you are trying to delete is referenced by other Items, you must remove all references to this item before it can be deleted. Anyone has g...

ccie16351 · 12-05-2013

Hi,I wonder if it is possible to set the disabled USP Port in the endpoints as a requirement in ISE Posture ?Appreciate your input.Mike

ccie16351 · 08-30-2013

Hi,I have made a mistake in the "Common name" when I generated the certificate for https proxy. On fixing the mistake at "Generate New Certificate and key", I notice, the certificate paramaters "Common name, Organization ..etc, do not get changed, ev...

ccie16351 · 07-05-2020

Hi the destination server looks as if it is in the Outside because I rolled back the change, until I figure out what is the problem Thanks

ccie16351 · 07-05-2020

HiThank you so much for your interest. I have attachedg ASA configuration. The x-ray servers (destination) are 172.16.34.0 network and the source is any IPv4 address coming from the hospital campus I am suspecting the IPS, it could be halting the tra...

ccie16351 · 07-02-2020

Hithere is no nat, firewall is DataCenter running software image 9.6. NAT is disabled by default packet trace is not available. I did rolled back, I may collect on next try but ping is workingthanks

ccie16351 · 10-31-2019

Hi Mike,as far as I know, having 2 seprate profiles wouldn't work, as NAM profile must be saved to pre-set name "configuration.xml", any other name is not acceptable. Thank you so much

ccie16351 · 12-05-2013

Hi Charles, I hasn't tried the solution, yet, but what you have said, with the pictorial detailed steps, I am quite confident, it will work.Very much appreciated

Member Since	‎06-07-2007 09:06 AM
Date Last Visited	‎07-29-2020 12:06 AM
Posts	88
Total Helpful Votes Received	6

User Statistics

User Activity

X-Ray images can't be browsed once placed Sectra PACS servers behind firewall

Can I have a unified NAM Profile to use for wired and wireless

I am adding AD Group, but stuck with bug CSCts17518 - says groups you deleting are referenced

ISE posture requirement to check if endpoint's USP port is disabled

How to clear existing SSL cert in WSA S170 7.5.1

Re: X-Ray images can't be browsed once placed Sectra PACS servers behind firewall

Re: X-Ray images can't be browsed once placed Sectra PACS servers behind firewall

Re: X-Ray images can't be browsed once placed Sectra PACS servers behind firewall

Re: Can I have a unified NAM Profile to use for wired and wireless

ISE posture requirement to check if endpoint's USP port is disab