About Stephane Bonnet

Stephane Bonnet · 01-11-2013

Hi everyone,I just began to deep dive in some brand new ASR 1001.I read about that functionnality and try to play with ... but unfortunatly it doesn't work.- Hardware & Software Info:IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.2(4)S...

Stephane Bonnet · 07-03-2012

Hi everyone,I recently state with our new nx-os version 6.0(4) SUP1 that we can finally use FEX feature.I need to know if it is also possible to use a Cisco B22HP (c-7000) with a NX-7K as parent switch in this release.I try to test a FEX port configu...

Stephane Bonnet · 11-15-2012

You have misinterpret the configuration i gave to you, you need to have 2 differents access-list in multicast boundary and igmp access-group.Keep your first access-list you use (101 & 102 with ip statement) in your first post for multicast boundary a...

Stephane Bonnet · 11-15-2012

I think you can use the two for safety:- inside your vlan your receivers will are only allowed to join some multicast group via igmp access-group- ip multicast boundary add another security by filtering control and also data plane traffic in multicas...

Stephane Bonnet · 11-15-2012

Hi,Your access-list in ip igmp access-group isn't in the best format.You must use the same kind of filtering but you may specify the word "igmp" not "ip".Try that:access-list 111 permit igmp 10.0.1.0 0.0.0.255 anyaccess-list 111 permit igmp 10.0.2.0 ...

Stephane Bonnet · 07-03-2012

Yep, i notice it's really obvious.But after some night dead hours of web surfing, i see some paper about NX-7K parent capability in Cisco document for this stuff & impossible for me to retrieve that damn document, i'm disappointed ...I have also see ...

Stephane Bonnet · 03-19-2012

Yes it's in the Conf Guide of the C2960S:http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_53_se/configuration/guide/swint.html#wp1080632And in fact, this isn't the same feature that i find on Cisco Feature Navigator.You...

Member Since	‎12-15-2011 05:52 AM
Date Last Visited	‎02-14-2024 12:05 AM
Posts	18

User Statistics

User Activity

ASR 1001 Dual IOS on lone RP

Nexus 7K - FEX - Cisco B22hp

Multicast routing preference

Multicast routing preference

Re: Multicast routing preference

Re: Nexus 7K - FEX - Cisco B22hp

way to limit switch ports speed to 100 FULL max but using auto n