Hola CarlosTratando de entender el esquema que presentas, puedo ofrecerte una opcion que quiza resulte funcional para dar solucion a tu problema.Teniendo en cuenta que el proporsito de HSRP es tener un gateway siempre disponible, esto a traves de su...
Hi Joseph Sorry if I´m not clear in my last comment.When I say : 30% 30% 15% 15% 15% 15% I´m talking about each Interface capacity.This matches with your comment : ----------------------------------------------------------------------------------...
Hi JosephIt is at the rate of 2 for 1 , while you have an amount of traffic on the interface, you must have "the double" in the other one.For example in 6 :6 --- 2:2:1:1:1:1Your Interfaces, must act like this :30% 30% 15% 15% 15% 15% or70% 70% ...
HiYou must to have enabled AAA on the Switch, and the Authentication method too.Here is a simple Dot1x configuration.SW# configure terminalSW(config)# aaa new-modelSW(config)# dot1x system-auth-controlSW(config)# aaa authentication dot1x default grou...
HiAn equal balance can be obtained only at 2,4, and 8With other combination you can get :Number of Ports in the EtherChannel --- Load Balancing8 --- 1:1:1:1:1:1:1:17 --- 2:1:1:1:1:1:16 --- 2:2:1:1:1:15 --- 2:2:2:1:14 --- 2:2:2:23 --...