Hi everybody,I upgraded the IOS on 6506E, SUP 720-10GE, non-redundant, to a new one, rebooted OK. Switch seems to work fine but "show bootvar" shows the previous IOS name instead of the new one: s72033-advipservicesk9_wan-mz.122-33.SXJ3.bin Remo...
I have an ASA5510, version 8.4(4)3 with AnyConnect Essentials 250 licences.Remote users using AnyConnect Essentials logged in to server, working fine, then frozen randomly. Checked “Monitoring, sessions” shows “Bytes Tx” 0 and "Bytes Rx" more than ...
Hi all,I have a 6506-E with 4 modules and 2 power supplies:WS-X6708-10GE (2 modules) WS-X6748-GE-TX Supervisor Engine 720 10GE VS-S720-10G system power total = 2671.20 Watts system pow...
Hi all, I have a 6506 with “ WS-X6K-SUP2-2GE”. The switch does not boot after restart, it goes to “rommon” mode, I have to manual enter command “Boot” then it boots and everything works like normal. The boot command is on configuration file (attached...
Hi, I have a new 4506-E, power on the 1st time, got the message: !!![ BIST FAILED - TEST ABORTED ]!!!Power-on-self-test for Module 1: WS-X45-SUP6L-ETest Status: (. = Pass, F = Fail, U = Untested) CPU Subsystem Test...
Hi Portu,During the failure, remote users can log on ASA but ping to the server fail so I have to reload ASA then everything is working normal. (Bytes Tx shows the number, not 0). Not sure the ASA 5510 can handle latest vesion 8.4(4)3 (Flash:256MB,...
