Hi everybody,We are trying to authenticate wireless clients using radius server and 802.1x protocol. Client wireless interface status remains "Validating Idenitity" and IAS server giving the following error :An Access-Request message was received fro...

Hi everybody,We are trying to authenticate wireless clients using radius server and 802.1x protocol. Client wireless interface status remains "Validating Idenitity" and IAS server giving the following error :An Access-Request message was received fro...

Hi everybody,We are trying to authenticate wireless clients using radius server and 802.1x protocol. Client wireless interface status remains "Validating Idenitity" and IAS server giving the following error :An Access-Request message was received fro...

Hi everybody,I'm trying to configure Cisco 4402 series wireless lan controller on a proof of concept lab, but it's generating extremely high LAN utilization (around 600-700 Mbps) on its connected port to backbone switch. We are using GLC-T on 4402's ...

Hi everyone,We are using multiple AIR-LAP1242G-E-K9 access points with single 4402 WLAN controller with one of our customers. Here is the detailed info :- WLAN management (192.168.1.51) and ap-manager IP's (192.168.1.50) are on same subnet & VLAN 12-...