About daleschultz

daleschultz · 03-20-2020

Hi:Is it possible to reset a C927 router with the hardware reset button and cause it to load a configuration file on flash or nvram with a name such as cpconfig-9xx.cfg ? This method works fine with the 800 series router using the file cpconfig-8xx.c...

daleschultz · 02-22-2020

Hi:I have a situation were a 10K LNS does not seem to be able to route Core traffic out an mGRE tunnel interface to a spoke connected via an LTE network.My basic configuration is as such:Cisco C10008 (PRE2-RP) LNS running IOS Version 12.2(33)SB17:!in...

daleschultz · 12-18-2013

Hi:I have a timer watchdog script that runs once a day to evaluate whether there is dialtone on the phone line attached to an external modem on aux 0.I have no problems with the script if Tcl cli debugging is disabled, but as soon as I enable 'event ...

Certificate CN as Accounting User-Name · 12-17-2013

Hi:I have DMVPN peers set to use RSA signatures for setting up IKE phase 1.Is it possible to get the certificate common name (CN=) to show up in AAA accounting records?I have not been able to find the appropriate PKI AAA commands to do this.Currently...

daleschultz · 10-23-2013

Hi:The command documenation is very limited:http://www.cisco.com/en/US/docs/ios-xml/ios/interface/command/ir-t2.html#wp1398569350Can someone explain what this command is really supposed to do?If I set it on the Tunnel interface which has a known dest...

daleschultz · 03-24-2020

Adding some info I learned.A file ending with .cfg on a USB drive plugged into the router when it is powered up will in fact be copied from the USB drive into startup-config and onto flash: and nvram: Once you have a startup-config loaded, the RESET ...

daleschultz · 12-18-2013

Thanks for the reply. That seems to fix my problem.I find it odd though as my term length was 24 and there was not 24 lines displayed before the --More-- prompt.

daleschultz · 12-18-2013

Thanks, authentication is already working. My question is about getting accounting records with the certificate CN showing up as the user-name in the accounting start record.

daleschultz · 12-17-2013

Yes that's what I would expect to happen, but it does not in practice. So the qusetion remains, how and when is this command supposed to be used.

daleschultz · 12-17-2013

Did I ask in the wrong forum maybe?

Member Since	‎07-25-2006 12:43 PM
Date Last Visited	‎11-24-2022 11:33 AM
Posts	38

User Statistics

User Activity

ISR 900 CCP Express startup config

Cisco 10K LNS not forwading traffic out mGRE Tunnel to spoke

Debugging output blocking script execution

Certificate CN as Accounting User-Name

tunnel source dynamic command

Re: ISR 900 CCP Express startup config

Debugging output blocking script execution

Re: Certificate CN as Accounting User-Name

tunnel source dynamic command

tunnel source dynamic command