About Italjapan

Italjapan · 01-13-2013

Hi,I'm configuring a Cisco 2600 (IOS 12.4) router with 3 ethernet ports:- LAN Port- WAN 1 port (First ISP)- WAN 2 port (Second ISP)I need:- Fault-tolerant/ Load balancing WAN connection with the two ISP connection using NAT from LAN- access from TCP/...

Italjapan · 12-04-2012

Hi,i'm going to configure a 881-k9 with:- Ethernet 0/0 LAN (Private Address)- Ethernet 0/1 ISP1 (Public Address 1)- Ethernet 0/2 ISP2 (Public Address 2)Can you help me to find some configuration example to:- have load balancing over the two ISP conne...

Italjapan · 01-13-2013

I was wrong...Per-destination load balancing is enabled by default when you enable CEF:http://www.cisco.com/en/US/docs/ios/12_2/switch/configuration/guide/xcfcefc.html#wp1000875I was trying to ping the same destination and the route was the same.But ...

Italjapan · 01-13-2013

Hi,i've not problem with incoming traffic to TCP/23 like i wrote here:"The configuration works fine for this:- access from TCP/23 FIRST-ISP IP and SECOND-ISP IP to TCP/23 of a LAN server (I assigned to 2 IP address to the ethernet interface of the ...

Italjapan · 12-11-2012

Hi,thanks for your answers.What i have to do to ensure traffic that become from ISP1 or ISP 2, traslated to an internal server (static PAT TCP/443), will come back with the right interface (the same he becomes)?I think that assigning the same adminis...

Italjapan · 12-04-2012

Hi,for PAT i found this:http://www.cisco.com/en/US/tech/tk175/tk15/technologies_configuration_example09186a0080093e51.shtmlSo if i have two ethernet interface with 2 Public IP Address (x.x.x.x and y.y.y.y) i have to use this 4 command:- ip nat inside...

Member Since	‎12-04-2012 12:41 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	7

User Statistics

User Activity

Dual WAN with PBR problem no load balancing

Cisco 881 Load balancing and Static NAT

Dual WAN with PBR problem no load balancing

Dual WAN with PBR problem no load balancing

Re: Cisco 881 Load balancing and Static NAT

Cisco 881 Load balancing and Static NAT