I'm using the default ASA config (inside is 192.168.1.1/24) and setup the FirePower module to use 192.168.1.2/24. Both the interface 2 and the MAN1/1 are in the same switch as is my management machine. I can ping the FirePower module from my PC and f...
I've recently setup two ASA5515X in A/S each with IDS. When I had them in the lab I was able to access the IPS's via IME but now that it's at the datacenter it's not working (of course). I've got the IPS configured with an IP on our LAN and the ASA's...
I'm wanting to send only certain traffic across L2L VPN, not everything. The setup is from my home (ASA5505) to the main office (ASA5510). For example, I'd like to send all SSH traffic from my LAN across the VPN. I've tried setting this up with ...
It's fixed. It was a problem with the Management interface plugged into the wrong switchport. Verified by shutting down the switchport and checking the Management 0/0 interface and found that when the switchport was shutdown, the Management0/0 port d...
I checked the 3750 stack for both of the IPS's in the A/S ASA setup and neither MAC is showing up, but the management interfaces are showing as up/up. Also, neither one of the Management 0/0 MAC's is showing up in the 3750's either.
When I run "show interfaces" I only get statistical information, nothing L2:Interface Statistics Total Packets Received = 0 Total Bytes Received = 0 Missed Packet Percentage = 0MAC statistics from interface Management0/0 Interface function = ...
