IntroductionPrerequisitesPurpose of this DocumentComponents UsedVerify Introduction This document provides information on how Content Addressable Memory(CAM)/ MAC address tables are updated on switches/layer 2 devices during a Transparent firewall f...
If the routes are learned via DHCP may need to use the dhcp client commands under the interface to apply tracking and distance to a learned dhcp route
http://www.cisco.com/c/en/us/td/docs/security/asa/asa-command-reference/A-H/cmdref1/d1.html#pgfId-...
If you are using VSS, I would suspect packet capture to work in your version of code.If you configured capture correctly and you dont see the packet in the capture, than that would mean the packet nevers arrives to the FWSM.
Hi Daniel...Do you have both FWSMs configured even though failover isnt working yet? If so, theres a possibilty that both FWSMs are trying to claim the 172.20.101.250 IP address. If both FWSM are configured with the same config without failover, tak...
We need more details. How are they colliding? Are the two DHCP servers communicating through the ASA. What is exactly the issue thats causing a problem with your dhcp servers.
