About ichacon00

ichacon00 · 01-20-2021

Recently we had a major power outage that knocked all of our domain controllers, after power was restored and all of our servers came up we noticed that we could no longer login our network gear. ISE showed that it was no longer joined to the domain....

ichacon00 · 09-14-2020

Our company recently decided to move our data center into Azure, for 6 months I've been trying to get our SDWAN licenses converted to cloud licenses without success. I've also been doing research trying to find any documentation on deploying all Vipt...

ichacon00 · 10-21-2016

I am trying to get MLD snooping configured on a pair of Nexus 5548 (NXOS 7) and just cant seem to find the commands, reference guides or anything that indicate support for this feature. Is it supported? does anyone have information on configuration ...

ichacon00 · 07-28-2011

Hello Support.Had a question regarding this scenario. One of our customers currently has SSLVPN enabled for its remote users and I was wondering if there is anyway to configure a remote Cisco router to connect via IPSEC to this SSLVPN endpoint? the i...

ichacon00 · 12-01-2010

We are trying to configure incoming mail relay through one of our office locations and redirect that external IP over to our datacenter via a DMVPN cloud. I am familiar with the route-map condition at the end of the NAT statement and have it already ...

ichacon00 · 01-21-2021

Thanks for the response. After we rejoined them they both show operational, and we are able to successfully test user authentications from the External Identity test user option. I will reach out to my AD team to see if they see anything in the logs,...

ichacon00 · 02-25-2019

Changing the default interface fixed my issues. Thanks!

ichacon00 · 11-14-2012

Your problem is the aaa authorization statement for groupauthor. Currently its pointing to group radius, it should be pointing to localReplace this lineaaa authorization network groupauthor group radius With this lineaaa authorization network groupau...

ichacon00 · 07-28-2011

Thanks for the response Jason,I understand they are different technologies and am also familiar with ezvpn and multiple site to site (LAN to LAN) configuration options. I was just trying to see if there was anything that could be done on my end witho...

ichacon00 · 12-02-2010

I got this working already, basically as I mentioned on my first post I used access-lists at different points of the network to simply determine if my packets where making it in that particular direction. Placed a route-map on the LAN interface of ou...

Member Since	‎10-01-2009 11:32 AM
Date Last Visited	‎07-04-2023 01:11 PM
Posts	17

User Statistics

User Activity

Network Authentication via ISE fails with error 40095

Deploying vManage in Azure

MLD Snooping support on Nexus 5k

Cisco Router to SSL VPN Configuration

NAT over VPN Tunnel

Re: Network Authentication via ISE fails with error 40095

Re: I have a oob mgmt interface

Cisco VPN Client Authenticate Against IAS

Cisco Router to SSL VPN Configuration

Re: NAT over VPN Tunnel