Point everything on both ends to the router as their default gateway. Either 192.168.102.250 or 192.168.146.250, depending on which location the systems reside. The 2901 routers will also need to have a default route pointing to the Fortinet(.1). As ...

From the P10 router, can you ping the workstation on the 102 subnet at Holiday?

Colby,Some of these things you have done based on our Twitter conversation, but I am listing them anyway for the benefit of others.1) Plug a workstation/laptop into the switch on one end.2) Point that workstation to the router as its gateway.3) From ...

Excuse the basic questions, but have you ensured there are free addresses in the DHCP scope? Are the other working 7921/5's in the same WLAN? If this is a new WLAN, are "ip helpers" setup on the L3 interface sitting on the switch/router if your Infob...

Hi Senzo.Do you know the reason for the port becoming disabled? Can you run a "show int status err" on the switch and see if it give a reason for the port shutting down?MatthewSent from Cisco Technical Support iPad App