About Quang Do Xuan

Quang Do Xuan · 12-30-2015

Hi, I am searching for this over the internet but couldn't find a good answer: When does route-map implicit deny apply? I knew for BGP route advertisement, a no-match route is discarded with implicit deny at the end of route-map whereas PBR skips the...

Quang Do Xuan · 12-23-2015

Hi guys, I having a backbone area with 2 ABRs (R4 & R1) summarizing 155.1.146.0/23 and 155.1.146.0/24 respectively. /24 is a subnet is in another area while /23 is created with "area range" command. When R5 received the LSAs it shows link ID as 155....

Quang Do Xuan · 04-25-2014

Hi everyone.Need you opinions for the following question. 1. When we replace a RP with another RP, is there any down time for the multicast applications. (I guess no because RP is only needed for initializing connection between source and clients, bu...

Quang Do Xuan · 10-06-2013

Hi all,I have several routers running OSPF and fully formed PIM neighborship.AutoRP was configured on one router (172.28.56.51) and also a static RP (10.0.0.6) was configured (it is a reachable IP address)I did the "show ip mroute" on some first hop ...

Quang Do Xuan · 01-11-2013

"The specification states that such relay routers must only advertise 2002::/16 and not subdivisions of it to prevent IPv4 routes polluting the routing tables of IPv6 routers."Please anyone explain to methe reason. Kindly give me any citation if poss...

Quang Do Xuan · 12-30-2015

Thanks Masoud, that is clear and nicely adds up our verdict here!

Quang Do Xuan · 12-30-2015

Thanks Richard, If route maps are applied in a policy-routing environment, packets that do not meet the match criteria are then forwarded according to the route table. So I guess policy-routing is the only special case or we can say "denied by PBR me...

Quang Do Xuan · 04-25-2014

Thanks Peter & Joseph,"This depends primarily on whether your network is configured to perform a switchover to the shortest path tree (SPT switchover), or whether it remains using the shared tree rooted at the RP"How to know whether my network has th...

Quang Do Xuan · 10-06-2013

Sorry if I wasted your time guysI just found out those which are listing the 2 groups as Sparse Mode were configured with the static RP 10.0.0.6And Auto RP's behavior is to ignore the 2 groups 224.0.1.40 and 224.0.1.39 then it wins over static RP for...

Quang Do Xuan · 10-03-2013

It's NULL because route through RP was pruned due to SPT switchover from shared stree. That happens after first few packets then source starts sending packets to receivers via their own SPT, that makes the SPT via RP unnecessary then it is pruned (ma...

Member Since	‎01-11-2013 05:32 AM
Date Last Visited	‎07-23-2018 09:57 AM
Posts	14

User Statistics

User Activity

Route-map implicit deny

OSPD LSA type 3 show .255 in last octet

Multicast concerns

224.0.1.40 and 224.0.1.39 in sparse mode

How does a more specific prefix of 6to4 pollute routes of native IPv6?

Thanks Masoud, that is clear

Re: Route-map implicit deny

Thanks Peter & Joseph,"This

224.0.1.40 and 224.0.1.39 in sparse mode

Re: Understand output from "show ip mroute" - Help