Can you use the same pair of Nexus 93180 switches (utilizing separate VRF’s) for WAN L3 (to DCI and MPLS to border leafs) and for the IPN switches (to Spines) to kill two birds with one stone. Or does it require two separate pairs of Nexus 9K’s.
Al...
I was wondering if anyone on these broads are considering or have purchased Tetration?
Also there are only two options right now for a Medium and Large environments, is Cisco considering releasing a smaller environment that is a little more price...
I noticed that the VLAN 32 is configured for HSRP. Can you please send the "show hsrp group #" for vlan 32" and "show run hsrp" configurations.I'm thinking out loud here but maybe you just change VLAN 32 for the SUN cluster to standard SVI interfaces...
The ports are configured with Layer 2 only as this switchport mode access. Nexus 9500 has the ability to form a vPC to make both links active. Is the 3845 Router only connected to only Nexus 9500 Does the Sun Servers get their IP addresses from the r...
Can you give a little more detail.What version fo NX-OS are you runningIs there a diagram from this environmentCan you paste the configuration for the Nexus 9K switch to see how the ports are configuredSUN ServersHow are the ports configured Layer 2 ...
I agree with Kirk, can answer the question until we get the entire configuration setup.A lot is going to have to do with how the Sun severs have their NIC teaming configured and on how the port-channel/channel-group is configured.