About cfenegan

cfenegan · 10-01-2003

Hello Everyone,Has anyone else come up against this problem?We have a client who has two ISP subnets at their head office (leased line and satellite broadband). I have been trying to establish a VPN tunnel between the head office PIX (PIX1) and a rem...

cfenegan · 09-28-2004

Hello I can't find it now but I have read somewhere in the Cisco documentation that access lists for IPSec tunnels cannot be restricted to specific protocols and/or ports. You can specify IP only as I recall. This may well be your problem. You will h...

cfenegan · 09-20-2004

Hello,You may run into routing issues. If you dedicate one interface for Internet access then that interface should have the default route. If your VPN clients are coming in on the second interface from anywhere, then for the ISAKMP negotiation to su...

cfenegan · 09-08-2004

Hello amashau,I do not think this can be done, by why would you want to anyway? Once the "client" PIX has connected to the "server" PIX, it will be devices attached behind the PIXs that communicate, with the PIXs (in effect) acting as routers - hence...

cfenegan · 08-05-2004

Hello NatalieI have had a number of issues with VPN over GPRS here in the UK, albeit with Orange not Vodafone, but hopefully the following pointers will help.Can you ping or otherwise access the PIX or Internet from the 3G dialup connection? Not all ...

cfenegan · 06-30-2004

Hello Warren,I've implemented a tunnel in the scenario you describe.The VPN tunnel was between a 3005 concentrator and a PIX 501 using IPSec. The PIX was configured to use PPPoE on the external interface. The PIX was connected to a DLink302G (I think...

Member Since	‎02-19-2002 05:52 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	8

User Statistics

User Activity

VPN out of PIX VLAN interface

Re: VPN Tunnel

Re: Two ISP links terminating on single pix firewall

Re: How to configure PIX firewall as a vpn client

Re: VPN over GPRS to PIX

Re: PIX 501 & 506 with ADSL ROuter/Modem