About marius.wehmer

marius.wehmer · 09-26-2010

Hi guys.I'm having problems with some setting on the PAP2t-eu.I can't seem to find where i can put the settings for:Dialling timeoutRing timeout if no number is dialledRing timeout if incomplete number (does not match the dialplanin the configfile.I'...

marius.wehmer · 10-19-2010

Is this the command you are using as a profile rule on the unit?/ata_linksys_pap2t/$MA.cfg?Remember to add [--key 00259C01020] in front of the URL.[--key 00259C01020]/ata_linksys_pap2t/$MA.cfg

marius.wehmer · 10-19-2010

I can see one fault in you command and that is:openssl enc -e -aes-256-cbc -k 00259C010203 -in 00259C010203.xml.gz -out 00259C010203.xml.gzShould beopenssl enc -e -aes-256-cbc -k 00259C010203 -in 00259C010203.xml.gz -out 00259C010203.cfg

marius.wehmer · 10-08-2010

btw. the cfg file can be decompiled using these commandsopenssl enc -d -aes-256-cbc -k 123456789 -in 00259c6d0845.cfg -out 00259c6d0845.xml.gzuncompress 00259c6d0845.xml.gzyou should then be able to read the xml file. i've tested it here and it works...

marius.wehmer · 10-08-2010

i've created the files.Thos should work.i've used these commands.gzip 00259c6d0845.xmlopenssl enc -e -aes-256-cbc -k 123456789 -in 00259c6d0845.xml.gz -out 00259c6d0845.cfgin the specific ATA box set this as a profile rule:[--key 123456789]tftp://add...

marius.wehmer · 10-05-2010

are you using tftp or http(s)?what is the server address? i'll create two configfiles so you can test.also need the macaddress for the unit you are testing on.btw. what firmware are the units running? and what version of spc are you using?

Member Since	‎03-26-2009 07:13 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	9

User Statistics

User Activity

PAP2t dial setting

Re: PAP2T provisioning

Re: PAP2T provisioning

Re: PAP2T provisioning

Re: PAP2T provisioning

Re: PAP2T provisioning