About MercatorIneo

MercatorIneo · 06-22-2020

Hello, I try to replace a legacy 800 router by a brand new RV260 router. Our configuration is simple:LAN : 192.168.2.0 -> router LAN is 192.168.2.1WAN : 192.168.1.2 default gateway on 192.168.1.1 -> optical fiberIn our LAN, we have an OpenVPN linux s...

MercatorIneo · 02-01-2017

Hello, We have a "hub and spokes" configuration made with 4 routers Cisco 800. Each spoke router use "crypto map staticmap" to connect to the hub router. The "hub and spokes" config works perfectly. Each user at each branch can ping any pc in other...

MercatorIneo · 01-10-2017

Hello, Our remote workers use AnyConnect 4.4.00243 to connect to a C881-K9 router. The IOS of this router has been upgraded to Cisco IOS Software, C800 Software (C800-UNIVERSALK9-M), Version 15.6(3)M1, RELEASE SOFTWARE (fc2) http://www.cisco.com/c/...

MercatorIneo · 01-02-2017

Hello, I use Cisco Anyconnect 4.4.00243 to connect to a SSL VPN hosted by a Cisco 800 router. When I launch the connection in AnyConnect, it starts web pages related to a certificate related to my banking system. I think AnyConnect test the certific...

MercatorIneo · 05-30-2015

Hello, I've 2 800-serie routers connected to provide VPN tunnel between 2 lans. It works very fine.For security reason, I have to reach an external host (public ip = a.b.c.d) from the remote branch through the tunnel, so using the public ip address o...

MercatorIneo · 06-30-2020

Finally we understood that the routes are not applied to inward traffic bouncing on the router (default gateway). With a packet sniffer, we saw those packets on the WAN interface of the router. Seems to be a bug in the router software. We do now the ...

MercatorIneo · 06-23-2020

The problem is not solved. But we've understood that the problem is the following : - inbound traffic from remote site arrives correctly to local device in our LAN- this device use the RV260 (192.168.2.1) as default gateway- the routes back to remote...

Thank your for the help. · 02-03-2017

Thank your for the help. Unfortunately these 2 changes do not solve de problem. Kind regards, Guy

Thank you for you help. · 02-02-2017

Thank you for you help. Yes, in remote branches, 192.168.20.0/24 is not natted and correctly set in the ACL referenced in the static map. I've observed this : if someone in a remote branch ping the IP of the mobile anyConnect user - this first ping s...

MercatorIneo · 01-03-2017

Thanks for your answer. Version 3 of AnyConnect did not present this issue. I've saved my day by making AnyConnect not to iterate through the user certificates but only the machine certificate. In preferences.xml in C:\ProgramData\Cisco\Cisco AnyConn...

Member Since	‎05-04-2012 08:27 AM
Date Last Visited	‎07-02-2020 10:53 AM
Posts	29

User Statistics

User Activity

Replacing legacy 800 serie router by RV260

AnyConnect users cannot use hub & spokes tunnels

AnyConnect 4.4 connected to router C881-K9 uses TLS 1.0, not TLS 1.2

Cisco Anyconnect 4

Traffic to specific host through tunnel

Re: Replacing legacy 800 serie router by RV260

Re: Replacing legacy 800 serie router by RV260

Thank your for the help.

Thank you for you help.

Thanks for your answer.