Lewis Benton
Level 1
Level 1
Member since ‎09-30-2007
‎05-15-2018

User Statistics

  • 21 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received

User Activity

If I'm not intending to boot from an iSCSI array, do I need to go the extra step and configure iSCSI vNIC's for use within vSphere or am I safe with just creating standard vNic's with the appropriate settings for Jumbo Frames, etc...?I believe before...
I was curious if anyone has been able to disable Speedstep on a B230 blade?  I've set a custom BIOS policy with it disabled, assigned it to the Service Profile for the blade and then rebooted the blade, but it still shows as enabled inside the BIOS s...
Hello,While I'm waiting for TAC and Development on this, I wanted to see if anyone else might've seen this behavior.  We have a new UCS Chassis with 3 B230 M1 blades, fully populated with memory.This past weekend, one of the blades started reporting ...
Hello,We have a rather odd issue with some backup static routes on my MPLS routers that I've yet to figure out the cause.We use BGP for routing on the MPLS, but in the event that a site has its circuits go down, we have static routes with a distance ...
Hello,I've got to be missing something simple here. I have two Catalyst 4948 about 15 miles apart, connected via dark fiber. They both have base IP image.I've been configuring RIP(version 2) to route between the switches. Static routes work fine, ...
Community Statistics
Member Since ‎09-30-2007 04:46 PM
Date Last Visited ‎05-15-2018 03:07 AM
Posts 21