Hello All, I have 2801 and 2811 cisco routers. I need to setup a lab serial connections between the routers. Will WIC 2Ts work with the 28XX series routers? Please advise.
Hello Guys, I am trying to setup my Greeting for my Custom Call Handler. When I click on the Java App to record using my Cisco Phone EXT 6666 but I get the attached messge. What causes this?
Hello All, I have 2 CMEs setup using a back to back T1 for PRI Configs. The phones ring when I call from on but when I pick up the other phone's handset there is nothing. No RTP. The call just hangs up after about 10 - 18 seconds. Below are...
Does anyone know who to convert config form a Juniper Netscreen Firewall to a ASA? We are trying to get rid of the netscreen firewalls at our location and replace them with ASA's. I know very little about Juniper Netscreen Firewalls.
My phone was working fine now it is not. I keep getting the errors below. Does anyone know what is going on?P: Intercepted Data Block 15 from inside:10.7.7.253/33217 to remote phone outside:50.73.73.66/18446Error: block # is 15, expecting 1PP: Inter...
Thanks for the Reply Max but after some researching I found that to voicemail ports on the CUCM did not have the correct Calling Search Space. My mistake. Everything works as it should now.
Hello Mklemovitch, Thanks for your reply. Your reply fits with exactly what I am thinking. The liability of an extended outage is entirely too great for me to try to do this in-house myself. I totally agree with the 3rd party solution. I ret...
Thanks Luis, I fixed the problem lastnight. It had somethting to do with the service provider and the way they provisioned my IP address. 2 of my 5 IP's do not work. That was the issue the whole time. I performed a couple of packet traces ...
Julio, You are not going to believe this but the outside interface was causing the problem. I changed the Speed 100 to Auto and now I am getting the speed I should get and more. Makes no sense to me but I guess whatever works right. Thanks.
